Skip to main content
Erschienen in: wissen kompakt 1/2015

01.02.2015 | Zahnärztliche Fortbildung

Bulk-Fill-Komposite

Vor- und Nachteile

verfasst von: Prof. Dr. J. Manhart, Prof. Dr. Dipl.-Ing. N. Ilie

Erschienen in: wissen kompakt | Ausgabe 1/2015

Einloggen, um Zugang zu erhalten

Zusammenfassung

Direkte Komposite im Seitenzahnbereich gehören heute zum Standard im Therapiespektrum der modernen Zahnheilkunde. Diese Füllungsart hat mittlerweile in vielen klinischen Studien ihre Leistungsfähigkeit im kaulasttragenden Seitenzahnbereich deutlich unter Beweis gestellt. Im Regelfall erfolgt die Verarbeitung in einer aufwendigen Schichttechnik. Diese zeitintensive Prozedur erfordert selbstverständlich eine dem Aufwand entsprechende Abrechnung. Neben den Möglichkeiten, welche hochästhetische Komposite bei Anwendung der polychromatischen Mehrschichttechnik bieten, besteht andererseits eine große Nachfrage nach möglichst einfach bzw. schnell und somit ökonomischer zu verarbeitenden Materialien auf Kompositbasis für den Seitenzahnbereich. Dieser Bedarf kann durch die immer beliebter werdenden Bulk-Fill-Komposite abgedeckt werden.
Literatur
1.
Zurück zum Zitat Hickel R, Ernst CP, Haller B et al (2005) Direkte Kompositrestaurationen im Seitenzahnbereich – Indikation und Lebensdauer. Gemeinsame Stellungnahme der Deutschen Gesellschaft für Zahnerhaltung (DGZ) und der Deutschen Gesellschaft für Zahn-, Mund- und Kieferheilkunde (DGZMK) aus dem Jahr 2005. Dtsch Zahnarztl Z 60:543–545 Hickel R, Ernst CP, Haller B et al (2005) Direkte Kompositrestaurationen im Seitenzahnbereich – Indikation und Lebensdauer. Gemeinsame Stellungnahme der Deutschen Gesellschaft für Zahnerhaltung (DGZ) und der Deutschen Gesellschaft für Zahn-, Mund- und Kieferheilkunde (DGZMK) aus dem Jahr 2005. Dtsch Zahnarztl Z 60:543–545
2.
Zurück zum Zitat Hickel R, Brushaver K, Ilie N (2013) Repair of restorations – criteria for decision making and clinical recommendations. Dent Mater 29:28–50PubMedCrossRef Hickel R, Brushaver K, Ilie N (2013) Repair of restorations – criteria for decision making and clinical recommendations. Dent Mater 29:28–50PubMedCrossRef
3.
Zurück zum Zitat Ilie N, Stawarczyk B (2014) Bulk-Fill-Komposite: neue Entwicklungen oder doch herkömmliche Komposite? ZMK 30:90–97 Ilie N, Stawarczyk B (2014) Bulk-Fill-Komposite: neue Entwicklungen oder doch herkömmliche Komposite? ZMK 30:90–97
4.
Zurück zum Zitat Tauböck TT (2013) Bulk-Fill-Komposite. Wird die Füllungstherapie einfacher, schneller und erfolgreicher? Teamwork J Cont Dent Educ 16:318–323 Tauböck TT (2013) Bulk-Fill-Komposite. Wird die Füllungstherapie einfacher, schneller und erfolgreicher? Teamwork J Cont Dent Educ 16:318–323
5.
Zurück zum Zitat Ferracane JL, Greener EH (1986) The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins. J Biomed Mater Res 20:121–131PubMedCrossRef Ferracane JL, Greener EH (1986) The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins. J Biomed Mater Res 20:121–131PubMedCrossRef
6.
Zurück zum Zitat Caughman WF, Caughman GB, Shiflett RA et al (1991) Correlation of cytotoxicity, filler loading and curing time of dental composites. Biomaterials 12:737–740PubMedCrossRef Caughman WF, Caughman GB, Shiflett RA et al (1991) Correlation of cytotoxicity, filler loading and curing time of dental composites. Biomaterials 12:737–740PubMedCrossRef
7.
Zurück zum Zitat Margeas R (2014) New bulk-fill material simplifies restorations to one step. Inside Dent 10:86–90 Margeas R (2014) New bulk-fill material simplifies restorations to one step. Inside Dent 10:86–90
8.
Zurück zum Zitat Manhart J (2010) Neues Konzept zum Ersatz von Dentin in der kompositbasierten Seitenzahnversorgung. ZWR Dtsch Zahnarztebl 119:118–125CrossRef Manhart J (2010) Neues Konzept zum Ersatz von Dentin in der kompositbasierten Seitenzahnversorgung. ZWR Dtsch Zahnarztebl 119:118–125CrossRef
9.
Zurück zum Zitat Manhart J (2011) Muss es immer Kaviar sein? – Die Frage nach dem Aufwand für Komposite im Seitenzahnbereich. ZMK 27:10–15 Manhart J (2011) Muss es immer Kaviar sein? – Die Frage nach dem Aufwand für Komposite im Seitenzahnbereich. ZMK 27:10–15
10.
Zurück zum Zitat Czasch P, Ilie N (2013) In vitro comparison of mechanical properties and degree of cure of bulk fill composites. Clin Oral Investig 17:227–235PubMedCrossRef Czasch P, Ilie N (2013) In vitro comparison of mechanical properties and degree of cure of bulk fill composites. Clin Oral Investig 17:227–235PubMedCrossRef
11.
Zurück zum Zitat Frankenberger R, Vosen V, Krämer N et al (2012) Bulk-Fill-Komposite: Mit dicken Schichten einfacher zum Erfolg? Quintessenz 65:579–584 Frankenberger R, Vosen V, Krämer N et al (2012) Bulk-Fill-Komposite: Mit dicken Schichten einfacher zum Erfolg? Quintessenz 65:579–584
12.
Zurück zum Zitat Hellwig E, Klimek J, Attin T (2009) Einführung in die Zahnerhaltung. Deutscher Ärzteverlag, Köln Hellwig E, Klimek J, Attin T (2009) Einführung in die Zahnerhaltung. Deutscher Ärzteverlag, Köln
13.
Zurück zum Zitat Haller B (2003) Moderne Füllungstechniken und ihre Langzeitbewährung. ZNN Zahnarztl Nachrichten Niedersachsen 4:10–11 Haller B (2003) Moderne Füllungstechniken und ihre Langzeitbewährung. ZNN Zahnarztl Nachrichten Niedersachsen 4:10–11
14.
Zurück zum Zitat Kluschke A (2010) SDR – die Zukunft in der Adhäsivtechnik? ZP Zahnarztl Praxis 13:86–95 Kluschke A (2010) SDR – die Zukunft in der Adhäsivtechnik? ZP Zahnarztl Praxis 13:86–95
15.
Zurück zum Zitat Haberkorn KE (2006) Randschluss von Fast-Track-Kompositfüllungen im Vergleich zu Amalgam- und Glasionomerzementfüllungen. Dissertation Medizinische Fakultät der Universität Ulm Haberkorn KE (2006) Randschluss von Fast-Track-Kompositfüllungen im Vergleich zu Amalgam- und Glasionomerzementfüllungen. Dissertation Medizinische Fakultät der Universität Ulm
16.
Zurück zum Zitat Schenck L (2011) Die Vier-Millimeter-Füllung: in einer Schicht gelegt und mit einer Belichtung polymerisiert. DZW Zahnarzt Woche 38/2011:3–5 Schenck L (2011) Die Vier-Millimeter-Füllung: in einer Schicht gelegt und mit einer Belichtung polymerisiert. DZW Zahnarzt Woche 38/2011:3–5
17.
Zurück zum Zitat Burtscher P (2011) Von geschichteten Inkrementen zur Vier-Millimeter-Bulk-Fill-Technik – Anforderungen an Komposit und Lichthärtung. DZW Zahnarzt Woche 39/2011:6–8 Burtscher P (2011) Von geschichteten Inkrementen zur Vier-Millimeter-Bulk-Fill-Technik – Anforderungen an Komposit und Lichthärtung. DZW Zahnarzt Woche 39/2011:6–8
18.
Zurück zum Zitat Vogel K, Rheinberger V (2012) Shrinkage and contraction force of bulk-filling and microhybrid composites. J Dent Res 91(Special Issue A):Abstract #858 Vogel K, Rheinberger V (2012) Shrinkage and contraction force of bulk-filling and microhybrid composites. J Dent Res 91(Special Issue A):Abstract #858
19.
Zurück zum Zitat El-Damanhoury HM, Elsahn NA, Platt JA (2013) Polymerization shrinkage stress kinetics of five bulk-fill resin composites. J Dent Res: Poster Presentation (Nr. 170786) at the IADR General Session Seattle, March 20–23, 2013 El-Damanhoury HM, Elsahn NA, Platt JA (2013) Polymerization shrinkage stress kinetics of five bulk-fill resin composites. J Dent Res: Poster Presentation (Nr. 170786) at the IADR General Session Seattle, March 20–23, 2013
20.
Zurück zum Zitat Rullmann I, Schattenberg A, Marx M et al (2012) Photoelastic determination of polymerization shrinkage stress in low-shrinkage resin composites. Schweiz Monatsschr Zahnmed 122:294–299PubMed Rullmann I, Schattenberg A, Marx M et al (2012) Photoelastic determination of polymerization shrinkage stress in low-shrinkage resin composites. Schweiz Monatsschr Zahnmed 122:294–299PubMed
21.
Zurück zum Zitat Ilie N, Hickel R (2011) Investigations on a methacrylate-based flowable composite based on the SDR technology. Dent Mater 27:348–355PubMedCrossRef Ilie N, Hickel R (2011) Investigations on a methacrylate-based flowable composite based on the SDR technology. Dent Mater 27:348–355PubMedCrossRef
22.
Zurück zum Zitat Dentsply International (2011) SDR™ Smart Dentin Replacement. Scientific Compendium. http://www.dentsply.de/bausteine.net/f/8883/SCSDRDeTrey110815E.pdf?fd=2. Zugegriffen: 11. Dez. 2014 Dentsply International (2011) SDR™ Smart Dentin Replacement. Scientific Compendium. http://​www.​dentsply.​de/​bausteine.​net/​f/​8883/​SCSDRDeTrey11081​5E.​pdf?​fd=​2.​ Zugegriffen: 11. Dez. 2014
23.
Zurück zum Zitat Tauböck TT, Feilzer A, Buchalla W et al (2012) Effect of photoactivation methods on shrinkage behavior of resin composites. J Dent Res 91(Special Issue C):Abstract #517 Tauböck TT, Feilzer A, Buchalla W et al (2012) Effect of photoactivation methods on shrinkage behavior of resin composites. J Dent Res 91(Special Issue C):Abstract #517
24.
Zurück zum Zitat Vogel K (2011) Geringe Schrumpfung und wenig Schrumpfungsstress sind entscheidende Grundlage. DZW Die Zahnarzt Woche Ausgabe 40/2011:9–12 Vogel K (2011) Geringe Schrumpfung und wenig Schrumpfungsstress sind entscheidende Grundlage. DZW Die Zahnarzt Woche Ausgabe 40/2011:9–12
25.
Zurück zum Zitat Facher A, Vogel K, Grabher K et al (2013) Comparison of flowable composites for bulk filling. J Dent Res: Poster Presentation (Nr. 175701) at the IADR General Session Seattle, March 20–23, 2013 Facher A, Vogel K, Grabher K et al (2013) Comparison of flowable composites for bulk filling. J Dent Res: Poster Presentation (Nr. 175701) at the IADR General Session Seattle, March 20–23, 2013
26.
Zurück zum Zitat Ilie N, Bucuta S, Draenert M (2013) Bulk-fill resin-based composites: an in vitro assessment of their mechanical performance. Oper Dent 38:618–625PubMedCrossRef Ilie N, Bucuta S, Draenert M (2013) Bulk-fill resin-based composites: an in vitro assessment of their mechanical performance. Oper Dent 38:618–625PubMedCrossRef
27.
Zurück zum Zitat Lassila LV, Nagas E, Vallittu PK et al (2012) Translucency of flowable bulk-filling composites of various thicknesses. Chin J Dent Res 15:31–35PubMed Lassila LV, Nagas E, Vallittu PK et al (2012) Translucency of flowable bulk-filling composites of various thicknesses. Chin J Dent Res 15:31–35PubMed
28.
Zurück zum Zitat Hickel R (2012) Neueste Komposite – viele Behauptungen. BZB Bayerisches Zahnarztebl 49:50–53 Hickel R (2012) Neueste Komposite – viele Behauptungen. BZB Bayerisches Zahnarztebl 49:50–53
29.
Zurück zum Zitat Frankenberger R, Garcia-Godoy F, Kramer N (2009) Clinical performance of viscous glass ionomer cement in posterior cavities over two years. Int J Dent 781462. doi:781410.781155/782009/781462 Frankenberger R, Garcia-Godoy F, Kramer N (2009) Clinical performance of viscous glass ionomer cement in posterior cavities over two years. Int J Dent 781462. doi:781410.781155/782009/781462
30.
Zurück zum Zitat Lohbauer U (2010) Dental glass ionomer cements as permanent filling materials? – Properties, limitations and future trends. Materials 3:76–96CrossRef Lohbauer U (2010) Dental glass ionomer cements as permanent filling materials? – Properties, limitations and future trends. Materials 3:76–96CrossRef
31.
Zurück zum Zitat Frankenberger R, Biffar R, Fecht G et al (2012) Die richtige Basisversorgung – Expertenzirkel. Dent Mag 30:12–24 Frankenberger R, Biffar R, Fecht G et al (2012) Die richtige Basisversorgung – Expertenzirkel. Dent Mag 30:12–24
32.
Zurück zum Zitat Ilie N, Kessler A, Durner J (2013) Influence of various irradiation processes on the mechanical properties and polymerisation kinetics of bulk-fill resin based composites. J Dent 41:695–702PubMedCrossRef Ilie N, Kessler A, Durner J (2013) Influence of various irradiation processes on the mechanical properties and polymerisation kinetics of bulk-fill resin based composites. J Dent 41:695–702PubMedCrossRef
33.
Zurück zum Zitat Ferracane J, Alex G, Margeas R (2014) Question: are bulk-fill composites a good idea? Inside Dent 10:42–44 Ferracane J, Alex G, Margeas R (2014) Question: are bulk-fill composites a good idea? Inside Dent 10:42–44
34.
Zurück zum Zitat Condon JR, Ferracane JL (1996) Evaluation of composite wear with a new multi-mode oral wear simulator. Dent Mater 12:218–226PubMedCrossRef Condon JR, Ferracane JL (1996) Evaluation of composite wear with a new multi-mode oral wear simulator. Dent Mater 12:218–226PubMedCrossRef
35.
Zurück zum Zitat Condon JR, Ferracane JL (1997) In vitro wear of composite with varied cure, filler level, and filler treatment. J Dent Res 76:1405–1411PubMedCrossRef Condon JR, Ferracane JL (1997) In vitro wear of composite with varied cure, filler level, and filler treatment. J Dent Res 76:1405–1411PubMedCrossRef
36.
Zurück zum Zitat Poggio C, Dagna A, Chiesa M et al (2012) Surface roughness of flowable resin composites eroded by acidic and alcoholic drinks. J Conserv Dent 15:137–140PubMedCentralPubMedCrossRef Poggio C, Dagna A, Chiesa M et al (2012) Surface roughness of flowable resin composites eroded by acidic and alcoholic drinks. J Conserv Dent 15:137–140PubMedCentralPubMedCrossRef
37.
Zurück zum Zitat Lowe RA (2010) The search for a low-shrinkage direct composite. Inside Dent 6:78–82 Lowe RA (2010) The search for a low-shrinkage direct composite. Inside Dent 6:78–82
38.
Zurück zum Zitat Seemann R, Pfefferkorn F, Hickel R (2011) Behaviour of general dental practitioners in Germany regarding posterior restorations with flowable composites. Int Dent J 61:252–256PubMedCrossRef Seemann R, Pfefferkorn F, Hickel R (2011) Behaviour of general dental practitioners in Germany regarding posterior restorations with flowable composites. Int Dent J 61:252–256PubMedCrossRef
39.
Zurück zum Zitat Sawlani K, Beck P, Ramp LC et al (2013) In vitro wear of eight bulk placed and cured composites. J Dent Res: Poster Presentation (Nr. 174833) at the IADR General Session Seattle, March 20–23, 2013 Sawlani K, Beck P, Ramp LC et al (2013) In vitro wear of eight bulk placed and cured composites. J Dent Res: Poster Presentation (Nr. 174833) at the IADR General Session Seattle, March 20–23, 2013
40.
Zurück zum Zitat Ilie N, Rencz A, Hickel R (2013) Investigations towards nano-hybrid resin-based composites. Clin Oral Investig 17:185–193PubMedCrossRef Ilie N, Rencz A, Hickel R (2013) Investigations towards nano-hybrid resin-based composites. Clin Oral Investig 17:185–193PubMedCrossRef
41.
Zurück zum Zitat Lee YK (2008) Influence of filler on the difference between the transmitted and reflected colors of experimental resin composites. Dent Mater 24:1243–1247PubMedCrossRef Lee YK (2008) Influence of filler on the difference between the transmitted and reflected colors of experimental resin composites. Dent Mater 24:1243–1247PubMedCrossRef
42.
Zurück zum Zitat Kim JJ, Moon HJ, Lim BS et al (2007) The effect of nanofiller on the opacity of experimental composites. J Biomed Mater Res B Appl Biomater 80:332–338PubMedCrossRef Kim JJ, Moon HJ, Lim BS et al (2007) The effect of nanofiller on the opacity of experimental composites. J Biomed Mater Res B Appl Biomater 80:332–338PubMedCrossRef
43.
Zurück zum Zitat Mitra SB, Wu D, Holmes BN (2003) An application of nanotechnology in advanced dental materials. J Am Dent Assoc 134:1382–1390PubMedCrossRef Mitra SB, Wu D, Holmes BN (2003) An application of nanotechnology in advanced dental materials. J Am Dent Assoc 134:1382–1390PubMedCrossRef
44.
Zurück zum Zitat Ilie N, Hickel R (2009) Investigations on mechanical behaviour of dental composites. Clin Oral Investig 13:427–438PubMedCrossRef Ilie N, Hickel R (2009) Investigations on mechanical behaviour of dental composites. Clin Oral Investig 13:427–438PubMedCrossRef
45.
Zurück zum Zitat ISO (2009) Dentistry – polymer-based restorative materials. ISO 4049:2009. Beuth-Verlag, Berlin. http://www.iso.org/iso/catalogue_detail.htm?csnumber=42898. Zugegriffen: 11. Dez. 2014 ISO (2009) Dentistry – polymer-based restorative materials. ISO 4049:2009. Beuth-Verlag, Berlin. http://​www.​iso.​org/​iso/​catalogue_​detail.​htm?​csnumber=​42898.​ Zugegriffen: 11. Dez. 2014
46.
Zurück zum Zitat Moorthy A, Hogg CH, Dowling AH et al (2012) Cuspal deflection and microleakage in premolar teeth restored with bulk-fill flowable resin-based composite base materials. J Dent 40:500–505PubMedCrossRef Moorthy A, Hogg CH, Dowling AH et al (2012) Cuspal deflection and microleakage in premolar teeth restored with bulk-fill flowable resin-based composite base materials. J Dent 40:500–505PubMedCrossRef
47.
Zurück zum Zitat Cao C, Kobussen G, Doruff M et al (2013) Cusp stress analysis between bulk-filled flowable and layered regular composites. J Dent Res: Poster Presentation (Nr. 176435) at the IADR General Session Seattle, March 20–23, 2013 Cao C, Kobussen G, Doruff M et al (2013) Cusp stress analysis between bulk-filled flowable and layered regular composites. J Dent Res: Poster Presentation (Nr. 176435) at the IADR General Session Seattle, March 20–23, 2013
48.
Zurück zum Zitat Ibarra E, Lien W, Vandewalle K et al (2013) Physical properties of a new sonically activated composite restorative material. J Dent Res: Poster Presentation (Nr. 170857) at the IADR General Session Seattle, March 20–23, 2013 Ibarra E, Lien W, Vandewalle K et al (2013) Physical properties of a new sonically activated composite restorative material. J Dent Res: Poster Presentation (Nr. 170857) at the IADR General Session Seattle, March 20–23, 2013
49.
Zurück zum Zitat El-Damanhoury H, Platt J (2014) Polymerization shrinkage stress kinetics and related properties of bulk-fill resin composites. Oper Dent 39:374–382PubMedCrossRef El-Damanhoury H, Platt J (2014) Polymerization shrinkage stress kinetics and related properties of bulk-fill resin composites. Oper Dent 39:374–382PubMedCrossRef
50.
Zurück zum Zitat Petrovic LM, Zorica DM, Stojanac I et al (2013) A model of the viscoelastic behavior of flowable resin composites prior to setting. Dent Mater 29:929–934PubMedCrossRef Petrovic LM, Zorica DM, Stojanac I et al (2013) A model of the viscoelastic behavior of flowable resin composites prior to setting. Dent Mater 29:929–934PubMedCrossRef
51.
Zurück zum Zitat Van Ende A, De Munck J, Van Landuyt KL et al (2013) Bulk-filling of high C-factor posterior cavities: effect on adhesion to cavity-bottom dentin. Dent Mater 29:269–277CrossRef Van Ende A, De Munck J, Van Landuyt KL et al (2013) Bulk-filling of high C-factor posterior cavities: effect on adhesion to cavity-bottom dentin. Dent Mater 29:269–277CrossRef
52.
Zurück zum Zitat El-Safty S, Silikas N, Watts DC (2012) Creep deformation of restorative resin-composites intended for bulk-fill placement. Dent Mater 28:928–935PubMedCrossRef El-Safty S, Silikas N, Watts DC (2012) Creep deformation of restorative resin-composites intended for bulk-fill placement. Dent Mater 28:928–935PubMedCrossRef
53.
Zurück zum Zitat Roggendorf MJ, Kramer N, Appelt A et al (2011) Marginal quality of flowable 4-mm base vs. conventionally layered resin composite. J Dent 39:643–647PubMedCrossRef Roggendorf MJ, Kramer N, Appelt A et al (2011) Marginal quality of flowable 4-mm base vs. conventionally layered resin composite. J Dent 39:643–647PubMedCrossRef
54.
Zurück zum Zitat Taschner M, Spallek R, Sommerey M et al (2013) Marginal quality of four different bulk-fill composites. J Dent Res: Poster Presentation (Nr. 174564) at the IADR General Session Seattle, March 20–23, 2013 Taschner M, Spallek R, Sommerey M et al (2013) Marginal quality of four different bulk-fill composites. J Dent Res: Poster Presentation (Nr. 174564) at the IADR General Session Seattle, March 20–23, 2013
55.
Zurück zum Zitat Acquaviva PA, Brazzoli S, Nembrini E et al (2013) Marginal adaptation of bulk-fill composites: a microscopical evaluation. J Dent Res: Poster Presentation (Nr. 177505) at the IADR General Session Seattle, March 20–23, 2013 Acquaviva PA, Brazzoli S, Nembrini E et al (2013) Marginal adaptation of bulk-fill composites: a microscopical evaluation. J Dent Res: Poster Presentation (Nr. 177505) at the IADR General Session Seattle, March 20–23, 2013
56.
Zurück zum Zitat Miragaya LM, Estevao A, Oliveira SG et al (2013) Shrinkage evaluation of different composite resins. J Dent Res: Poster Presentation (Nr. 177811) at the IADR General Session Seattle, March 20–23, 2013 Miragaya LM, Estevao A, Oliveira SG et al (2013) Shrinkage evaluation of different composite resins. J Dent Res: Poster Presentation (Nr. 177811) at the IADR General Session Seattle, March 20–23, 2013
57.
Zurück zum Zitat Campos EA, Ardu S, Lefever D et al (2014) Marginal adaptation of class II cavities restored with bulk-fill composites. J Dent 42:575–581PubMedCrossRef Campos EA, Ardu S, Lefever D et al (2014) Marginal adaptation of class II cavities restored with bulk-fill composites. J Dent 42:575–581PubMedCrossRef
58.
59.
Zurück zum Zitat De Biasi M, Calvi RM, Sossi D et al (2010) Microhardness of a new flowable composite liner for posterior restorations. Dent Mater 26(Suppl 1):e25 De Biasi M, Calvi RM, Sossi D et al (2010) Microhardness of a new flowable composite liner for posterior restorations. Dent Mater 26(Suppl 1):e25
60.
Zurück zum Zitat Zawawi S, Brulat N, Nathanson D (2012) Curing mode and duration effect on polymerization of bulk-fill composites. J Dent Res 91(Special Issue C):Abstract #515 Zawawi S, Brulat N, Nathanson D (2012) Curing mode and duration effect on polymerization of bulk-fill composites. J Dent Res 91(Special Issue C):Abstract #515
61.
Zurück zum Zitat Brulat-Bouchard N, Zawawi S, Nathanson D (2012) Effect of LED curing units on properties of bulk-fill composites. J Dent Res 91(Special Issue C):Abstract #516 Brulat-Bouchard N, Zawawi S, Nathanson D (2012) Effect of LED curing units on properties of bulk-fill composites. J Dent Res 91(Special Issue C):Abstract #516
62.
Zurück zum Zitat Garcia D, Yaman P, Dennison J et al (2012) Polymerization shrinkage and hardness of three bulk fill flowable resins. J Dent Res 91(Special Issue A):Abstract #860 Garcia D, Yaman P, Dennison J et al (2012) Polymerization shrinkage and hardness of three bulk fill flowable resins. J Dent Res 91(Special Issue A):Abstract #860
63.
Zurück zum Zitat Kunduru H, Finkelman M, Doherty EH et al (2013) Depth of cure of different shades of bulk fill composites. J Dent Res: Poster Presentation (Nr. 174741) at the IADR General Session Seattle, March 20–23, 2013 Kunduru H, Finkelman M, Doherty EH et al (2013) Depth of cure of different shades of bulk fill composites. J Dent Res: Poster Presentation (Nr. 174741) at the IADR General Session Seattle, March 20–23, 2013
64.
Zurück zum Zitat Goracci C, Cadenaro M, Fontanive L et al (2014) Polymerization efficiency and flexural strength of low-stress restorative composites. Dent Mater 30:688–694PubMedCrossRef Goracci C, Cadenaro M, Fontanive L et al (2014) Polymerization efficiency and flexural strength of low-stress restorative composites. Dent Mater 30:688–694PubMedCrossRef
65.
Zurück zum Zitat Alrahlah A, Silikas N, Watts DC (2014) Post-cure depth of cure of bulk fill dental resin-composites. Dent Mater 30:149–154PubMedCrossRef Alrahlah A, Silikas N, Watts DC (2014) Post-cure depth of cure of bulk fill dental resin-composites. Dent Mater 30:149–154PubMedCrossRef
66.
Zurück zum Zitat Polydorou O, Manolakis A, Hellwig E et al (2008) Evaluation of the curing depth of two translucent composite materials using a halogen and two LED curing units. Clin Oral Investig 12:45–51PubMedCrossRef Polydorou O, Manolakis A, Hellwig E et al (2008) Evaluation of the curing depth of two translucent composite materials using a halogen and two LED curing units. Clin Oral Investig 12:45–51PubMedCrossRef
67.
Zurück zum Zitat Ferracane JL, Mitchem JC, Condon JR et al (1997) Wear and marginal breakdown of composites with various degrees of cure. J Dent Res 76:1508–1516PubMedCrossRef Ferracane JL, Mitchem JC, Condon JR et al (1997) Wear and marginal breakdown of composites with various degrees of cure. J Dent Res 76:1508–1516PubMedCrossRef
68.
Zurück zum Zitat Silikas N, Eliades G, Watts DC (2000) Light intensity effects on resin-composite degree of conversion and shrinkage strain. Dent Mater 16:292–296PubMedCrossRef Silikas N, Eliades G, Watts DC (2000) Light intensity effects on resin-composite degree of conversion and shrinkage strain. Dent Mater 16:292–296PubMedCrossRef
69.
Zurück zum Zitat Alshali RZ, Silikas N, Satterthwaite J (2013) Degree of conversion of bulk fill resin-composites over time. J Dent Res: Poster Presentation (Nr. 177480) at the IADR General Session Seattle, March 20–23, 2013 Alshali RZ, Silikas N, Satterthwaite J (2013) Degree of conversion of bulk fill resin-composites over time. J Dent Res: Poster Presentation (Nr. 177480) at the IADR General Session Seattle, March 20–23, 2013
70.
Zurück zum Zitat Leprince JG, Palin WM, Vanacker J et al (2014) Physico-mechanical characteristics of commercially available bulk-fill composites. J Dent 42:993–1000PubMedCrossRef Leprince JG, Palin WM, Vanacker J et al (2014) Physico-mechanical characteristics of commercially available bulk-fill composites. J Dent 42:993–1000PubMedCrossRef
71.
Zurück zum Zitat Fleming GJ, Awan M, Cooper PR et al (2008) The potential of a resin-composite to be cured to a 4 mm depth. Dent Mater 24:522–529PubMedCrossRef Fleming GJ, Awan M, Cooper PR et al (2008) The potential of a resin-composite to be cured to a 4 mm depth. Dent Mater 24:522–529PubMedCrossRef
72.
Zurück zum Zitat Bucuta S, Ilie N (2014) Light transmittance and micro-mechanical properties of bulk fill vs. conventional resin based composites. Clin Oral Investig. doi:10.1007/s00784-013-1177-y Bucuta S, Ilie N (2014) Light transmittance and micro-mechanical properties of bulk fill vs. conventional resin based composites. Clin Oral Investig. doi:10.1007/s00784-013-1177-y
73.
Zurück zum Zitat Celik C, Arhun N, Yamanel K (2010) Clinical evaluation of resin-based composites in posterior restorations: 12-month results. Eur J Dent 4:57–65PubMedCentralPubMed Celik C, Arhun N, Yamanel K (2010) Clinical evaluation of resin-based composites in posterior restorations: 12-month results. Eur J Dent 4:57–65PubMedCentralPubMed
74.
Zurück zum Zitat Manhart J, Chen HY, Hickel R (2010) Clinical evaluation of the posterior composite quixfil in class I and II cavities: 4-year follow-up of a randomized controlled trial. J Adhes Dent 12:237–243PubMed Manhart J, Chen HY, Hickel R (2010) Clinical evaluation of the posterior composite quixfil in class I and II cavities: 4-year follow-up of a randomized controlled trial. J Adhes Dent 12:237–243PubMed
75.
Zurück zum Zitat Frankenberger R (2012) Klasse-II-Kompositfüllungen in Bulk- und Schichttechnik im Vergleich. Resultate nach sechs Monaten. Bericht zur klinischen Studie über SonicFill (Kerr). http://www.sonicfill.de/media/4878/sonicfill_whitepaper_de.pdf. Zugegriffen: 11. Dez. 2014 Frankenberger R (2012) Klasse-II-Kompositfüllungen in Bulk- und Schichttechnik im Vergleich. Resultate nach sechs Monaten. Bericht zur klinischen Studie über SonicFill (Kerr). http://​www.​sonicfill.​de/​media/​4878/​sonicfill_​whitepaper_​de.​pdf.​ Zugegriffen: 11. Dez. 2014
76.
Zurück zum Zitat Van Dijken JW, Pallesen U (2014) A randomized controlled three year evaluation of „bulk-filled“ posterior resin restorations based on stress decreasing resin technology. Dent Mater 30:e245–e251CrossRef Van Dijken JW, Pallesen U (2014) A randomized controlled three year evaluation of „bulk-filled“ posterior resin restorations based on stress decreasing resin technology. Dent Mater 30:e245–e251CrossRef
77.
Zurück zum Zitat Kachalia P, Geissberger M, Gupta A (2011) Clinical evaluation of restorations using a new composite material and oscillating handpiece and comparing it with traditional composite material and placement technique – 6 months recall. SonicFill: Portfolio of Scientific Research (Kerr Corporation):1. http://www.kerrdental.com/cms-filesystem-action?file=KerrDental-University-ClinicalStudies/sonicfill-psr-2011-10-11-3.pdf. Zugegriffen: 11. Dez. 2014 Kachalia P, Geissberger M, Gupta A (2011) Clinical evaluation of restorations using a new composite material and oscillating handpiece and comparing it with traditional composite material and placement technique – 6 months recall. SonicFill: Portfolio of Scientific Research (Kerr Corporation):1. http://​www.​kerrdental.​com/​cms-filesystem-action?​file=​KerrDental-University-ClinicalStudies/​sonicfill-psr-2011-10-11-3.​pdf.​ Zugegriffen: 11. Dez. 2014
78.
Zurück zum Zitat Manhart J, Chen HY, Hickel R (2009) Three-year results of a randomized controlled clinical trial of the posterior composite QuiXfil in class I and II cavities. Clin Oral Investig 13:301–307PubMedCrossRef Manhart J, Chen HY, Hickel R (2009) Three-year results of a randomized controlled clinical trial of the posterior composite QuiXfil in class I and II cavities. Clin Oral Investig 13:301–307PubMedCrossRef
79.
Zurück zum Zitat o A (2013) Tetric EvoCeram Bulk Fill: 1-year clinical performance. Dent Advisor 30(10). http://www.dentaladvisor.com/clinical-evaluations/evaluations/tetric-evoceram-bulk-fill-1-yr.shtml. Zugegriffen: 11. Dez. 2014 o A (2013) Tetric EvoCeram Bulk Fill: 1-year clinical performance. Dent Advisor 30(10). http://​www.​dentaladvisor.​com/​clinical-evaluations/​evaluations/​tetric-evoceram-bulk-fill-1-yr.​shtml.​ Zugegriffen: 11. Dez. 2014
80.
Zurück zum Zitat Peschke A (2013) Ein neues Bulk-Fill-Material in der klinischen Anwendung. DZW Zahnarzt Woche 45/2013:10–11 Peschke A (2013) Ein neues Bulk-Fill-Material in der klinischen Anwendung. DZW Zahnarzt Woche 45/2013:10–11
81.
Zurück zum Zitat Todd JC, Wanner M (2014) Wissenschaftliche Dokumentation Tetric EvoCeram® Bulk Fill. Ivoclar Vivadent AG. http://www.ivoclarvivadent.de/de/composites/alle/produkte/fuellungsmaterialien/composites/tetric-evoceram-bulk-fill. Zugegriffen: 11. Dez. 2014 Todd JC, Wanner M (2014) Wissenschaftliche Dokumentation Tetric EvoCeram® Bulk Fill. Ivoclar Vivadent AG. http://​www.​ivoclarvivadent.​de/​de/​composites/​alle/​produkte/​fuellungsmateria​lien/​composites/​tetric-evoceram-bulk-fill.​ Zugegriffen: 11. Dez. 2014
82.
Zurück zum Zitat Manhart J, Neuerer P, Hickel R (o J) 10-Jahresergebnisse von QuiXfil und Tetric Ceram in einer kontrollierten klinischen Studie. Publikation in Vorbereitung Manhart J, Neuerer P, Hickel R (o J) 10-Jahresergebnisse von QuiXfil und Tetric Ceram in einer kontrollierten klinischen Studie. Publikation in Vorbereitung
83.
Zurück zum Zitat Lynch CD, Opdam NJ, Hickel R et al (2014) Guidance on posterior resin composites: academy of operative dentistry – European section. J Dent 42:377–383PubMedCrossRef Lynch CD, Opdam NJ, Hickel R et al (2014) Guidance on posterior resin composites: academy of operative dentistry – European section. J Dent 42:377–383PubMedCrossRef
84.
Zurück zum Zitat Nazari A, Sadr A, Shimada Y et al (2012) 3D void assessment in flowable resin composites using SS-OCT. J Dent Res 91(Special Issue A):Abstract #162 Nazari A, Sadr A, Shimada Y et al (2012) 3D void assessment in flowable resin composites using SS-OCT. J Dent Res 91(Special Issue A):Abstract #162
85.
Zurück zum Zitat Silikas N, Zankuli M, Watts DC (2012) Edge strength of bulk-fill and conventional resin-composites. J Dent Res 91(Special Issue C):Abstract #514 Silikas N, Zankuli M, Watts DC (2012) Edge strength of bulk-fill and conventional resin-composites. J Dent Res 91(Special Issue C):Abstract #514
86.
Zurück zum Zitat Weinhold HC (2011) Mehr als nur viel Zeit gespart – Wirtschaftlichkeit in der Praxis. DZW Zahnarzt Woche 41/2011:13–15 Weinhold HC (2011) Mehr als nur viel Zeit gespart – Wirtschaftlichkeit in der Praxis. DZW Zahnarzt Woche 41/2011:13–15
87.
Zurück zum Zitat Hofmann N (2010) Zeitgemäße Schichttechnik für Komposit im Seitenzahngebiet. Quintessenz 61:567–572 Hofmann N (2010) Zeitgemäße Schichttechnik für Komposit im Seitenzahngebiet. Quintessenz 61:567–572
88.
Zurück zum Zitat Feilzer AJ, De Gee AJ, Davidson CL (1987) Setting stress in composite resin in relation to configuration of the restoration. J Dent Res 66:1636–1639PubMedCrossRef Feilzer AJ, De Gee AJ, Davidson CL (1987) Setting stress in composite resin in relation to configuration of the restoration. J Dent Res 66:1636–1639PubMedCrossRef
89.
Zurück zum Zitat Ehlers V, Ernst C-P, Willershausen B (2012) Die Bulk-Fill-Milchzahnfüllung – ein Fallbericht. ZMK 28:860–861 Ehlers V, Ernst C-P, Willershausen B (2012) Die Bulk-Fill-Milchzahnfüllung – ein Fallbericht. ZMK 28:860–861
90.
Zurück zum Zitat Manhart J, Chen H, Hamm G et al (2004) Review of the clinical survival of direct and indirect restorations in posterior teeth of the permanent dentition. Oper Dent 29:481–508PubMed Manhart J, Chen H, Hamm G et al (2004) Review of the clinical survival of direct and indirect restorations in posterior teeth of the permanent dentition. Oper Dent 29:481–508PubMed
91.
Zurück zum Zitat Burke FJ, Palin WM, James A et al (2009) The current status of materials for posterior composite restorations: the advent of low shrink. Dent Update 36:401–402PubMed Burke FJ, Palin WM, James A et al (2009) The current status of materials for posterior composite restorations: the advent of low shrink. Dent Update 36:401–402PubMed
Metadaten
Titel
Bulk-Fill-Komposite
Vor- und Nachteile
verfasst von
Prof. Dr. J. Manhart
Prof. Dr. Dipl.-Ing. N. Ilie
Publikationsdatum
01.02.2015
Verlag
Springer Berlin Heidelberg
Erschienen in
wissen kompakt / Ausgabe 1/2015
Print ISSN: 1863-2637
Elektronische ISSN: 2190-3816
DOI
https://doi.org/10.1007/s11838-014-0225-z

Weitere Artikel der Ausgabe 1/2015

wissen kompakt 1/2015 Zur Ausgabe

Zahnärztliche Fortbildung

Kleben ohne Phosphorsäureätzung

Newsletter

Bestellen Sie unseren kostenlosen Newsletter Update Zahnmedizin und bleiben Sie gut informiert – ganz bequem per eMail.